Drakvantar

Drakvantar


De här vantarna är gjorda i zauberball garn och med virknål 4 mm.


Beroende på hur tjockt garn du använder så blir vantarna olika varma men även olika "klumpiga"
Det går att använda vilket garn som helst och använd den virknål som skall vara till garnet. 

Börja med att göra så många maskor som du behöver för att det ska räcka runt din hand (antalet maskor måste vara delbart på 4) och fäst ihop ringen med en sm i första lm. 

Jag har använt sockgarn till de lila spräckliga vantarna och zauberball till de svart/grå/vita. Med virknål 4 mm och gjorde jag 28 lm på de lila och 32 lm på de svarta.


v 1-2:         1 fm i varje m.                                                                 
v 3:            3 lm, 1 st i samma m, *1 lm, hoppa över 1 m, 1 st, 
                  1 lm, hoppa över 1 m, 1 st, 1 lm, 1 st i samma m*. 
                  Upprepa mellan **varvet ut. Avsluta v med en sm i 2 lm.   


  

v 4:            2 lm, 4 st runt första st av de två som sitter i samma m.
(Gul pil på bilden), 1 lm,vänd arbetet på tvären och virka
5 st upp för den andra av de två stolparna (Röd pil på bilden). 

                  Gör en fm på nästa stolpe (Grön prick). 

5 st ner för första st (gul pil), 5 st upp för andra st (röd pil) = ett "fjäll".
               Fortsätt att göra 5 st ner för första st i V:et, 1 lm, 5 stolpar upp 
               för andra st i V:et, 1 fm på den ensamma st, varvet ut. = 8 fjäll. 
               Avsluta med den fm på sista st. 

Så här blir fjällen.

v 5:            3 lm, 1 st i samma m. *1 lm, 1 st i mitten på föregående varvs
fjäll. (1 st, 1 lm 1 st i den fm på föregående v)* Upprepa varvet

ut.

Upprepa varv 5 (grunden för att göra fjäll) och varv 4 (själva fjällen) 6 gånger eller så många du vill ha för att vanten skall täcka handen och fingrarna. 

Tumme:    
v 6:            2 lm, 2 st tills i samma m, 5 lm (kolla så tummen får plats i hålet
                  som blir. Gör fler, eller mindre maskor annars), *3 st tills i fm
mellan fjällen på varvet innan, 1 lm, 3 st tills i mellanrummet på
fjället, 1 lm*. Upprepa mellan ** varvet ut. Avsluta med en sm.

Tummhålet görs med 5 lm och hoppa över mitten på ett fjäll. 
v 7:            1 sm runt nästa luftmaskbåge, 2 lm, 2 st tills runt
luftmaskbågen, 1 lm, 3 st tills runt luftmaskbågen, *3 st tills runt
lm på varvet innan* Upprepa varvet ut, avsluta med en sm. 

v 8-13:      1 sm runt nästa luftmaskbåge, 2 lm, 2 st tills runt lm på varvet
                  innan, 1 lm, *3 st tills runt lm på varvet innan, 1 lm* 
                  Upprepa ** varvet ut, avsluta med en sm. 

v 14:          Minska 1 stolpgrupp: 
                  1 sm runt nästa luftmaskbåge, 2 lm, 1 st runt samma lmb, 
                  1 st runt nästa lmb tills (nu har det minskats med 1 stolpgrupp till
                  varvet efter), 1 lm, *3 st tills runt nästa lm på varvet innan, 1 lm* 

                  Upprepa ** varvet ut, avsluta med en sm.
Minskning genom att göra 2 st runt första lmb, 1 st runt nästa tillsammans.

v 15-  :       1 sm runt nästa luftmaskbåge, 2 lm, 2 st tills runt lm på varvet
                  innan, 1 lm, *3 st tills runt lm på varvet innan, 1 lm* 

                  Upprepa ** varvet ut, avsluta med en sm.

Fortsätt med v 15 så långt du vill att vanten skall vara upp på armen. 
Avsluta med en spetskant ifall du vill. 



//Pernilla






3D Pumpa

3D Pumpa





Jag använde virknål 4mm och Järbo Lady garn
Pumpan är ca 12 x 8 cm.

Pumpa: 

v 1:          Gör 6 fm runt en magic loop.                                               (6 m)
v 2:         *2 fm i varje m*, upprepa v ut.                                           (12 m)  
v 3:         *2 fm i samma m, 1 fm i nästa*, upprepa v ut.                    (18 m)
v 4:         *2 fm i samma m, 2 fm*, upprepa v ut.                               (24 m)
v 5:         *2 fm i samma m, 3 fm*, upprepa v ut.                               (30 m)
v 6:         *2 fm i samma m, 4 fm*, upprepa v ut.                               (36 m)
v 7:         *2 fm i samma m, 5 fm i nästa*, upprepa v ut.                    (42 m)
v 8:         *2 fm i samma m, 6 fm*, upprepa v ut.                               (48 m)
v 9:         *2 fm i samma m, 7 fm*, upprepa v ut.                               (54 m)

v 10:       *2 fm i samma m, 8 fm*, upprepa v ut.                               (60 m)
v 11:       *2 fm i samma m, 9 fm*, upprepa v ut.                               (66 m)


v 12:       *2 fm i samma m, 10 fm*, upprepa v ut.                             (72 m)
v 13-23:    1 fm i varje m.                                                                 (72 m)
v 24:       *2 fm tills, 10 fm*, upprepa v ut.                                        (66 m)
v 25:       *2 fm tills, 9 fm*, upprepa v ut.                                          (60 m)
v 26:       *2 fm tills, 8 fm*, upprepa v ut.                                          (54 m)

v 27:       *2 fm tills, 7 fm*, upprepa v ut.                                          (48 m)
v 28:       *2 fm tills, 6 fm*, upprepa v ut.                                          (42 m)
v 29:       *2 fm tills, 5 fm*, upprepa v ut.                                          (36 m)
v 30:       *2 fm tills, 4 fm*, upprepa v ut.                                          (30 m)
v 31:       *2 fm tills, 3 fm*, upprepa v ut.                                          (24 m)
v 32:       *2 fm tills, 2 fm*, upprepa v ut.                                          (18 m)

v 33:       *2 fm tills, 1 fm*, upprepa v ut.                                          (12 m)
     Fyll med vadd.
v 34:         2 fm tills, upprepa v ut.                                                    (6 m)  

Ta av garnet, lämna en lång ände. Sy ihop hålet. Klipp INTE av garnet!
Stoppa in nålen i mitten på botten av pumpan, rakt igenom och ut genom mitten högst upp. Dra åt. Fortsätt att dra garnet runt och dra åt så det får formen av en pumpa. Jag gjorde det 6 gånger men man kan göra fler om man vill. Fäst ordentligt och klipp av garnet.  


Stjälk:

Använd brunt garn. 

v 1:          Gör 6 fm runt en magic loop.                                             (6 m)

v 2:         *2 fm i samma, 1 fm*, upprepa 3 ggr.                                (9 m) 
v 3-7:       1 fm i varje m.                                                                 (9 m)


Slinger: 3 st 

Använd grönt garn. 

50 lm, 3 fm i 2a m från nålen. Fortsätt att göra 3 fm i varje m. 
Ta av garnet. 


Löv: 3 st

16 lm. 

v 1:    1 fm i 2a m från nålen, 1 fm, 2 hst, 7 st, 2 hst, 1 fm, 3 fm i sista m. 
          Vänd och virka ner för andra sidan av luftmaskkedjan. 
          1 fm, 2 hst, 7 st, 2 hst, 2 fm. 
v 2:    1 fm i varje m. avsluta med en sm och ta av garnet. 






ENG, 3D Pumpkin

3D Pumpkin







I used a hook 4 mm and the pumpkin is 12 x 8 cm. 

Pumpkin:

Use orange yarn. 

Row 1:        6 sc in a magic loop.                                                  (6)
Row 2:        2 sc i each sc around.                                                (12)
Row 3:      *2 sc in next, 1 sc* - repeat                                         (18)
Row 4:      *2 sc in next, 2 sc* - repeat                                         (24)
Row 5:      *2 sc in next, 3 sc* - repeat                                         (30)
Row 6:      *2 sc in next, 4 sc* - repeat                                         (36)  
Row 7:      *2 sc in next, 5 sc* - repeat                                         (42)
Row 8:      *2 sc in next, 6 sc* - repeat                                         (48)
Row 9:      *2 sc in next, 7 sc* - repeat                                         (54)
Row 10:    *2 sc in next, 8 sc* - repeat                                         (60) 
Row 11:    *2 sc in next, 9 sc* - repeat                                         (66)
Row 12:    *2 sc in next, 10 sc* - repeat                                       (72)
Row 13-23: 1 sc in each sc around.                                               (72)
Row 24:    *dc2tog, 10 sc* - repeat                                              (66)
Row 25:    *dc2tog, 9 sc* - repeat                                                (60)
Row 26:    *dc2tog, 8 sc* - repeat                                                (54)
Row 27:    *dc2tog, 7 sc* - repeat                                                (48)
Row 28:    *dc2tog, 6 sc* - repeat                                                (42)
Row 29:    *dc2tog, 5 sc* - repeat                                                (36)
Row 30:    *dc2tog, 4 sc* - repeat                                                (30)
Row 31:    *dc2tog, 3 sc* - repeat                                                (24)
Row 32:    *dc2tog, 2 sc* - repeat                                                (18)
Row 33:    *dc2tog, 1 sc* - repeat                                                (12)
    Stuff the pumpkin.
Row 34:     *dc2tog* - repeat                                                       (6)

Cut the yarn and leave a long end. Sew together the hole and pull the yarn over one side of the pumpkin, pierce the pumpkin in the middle, bottom up, and pull tight. Continue to pull the yarn over and through the middle, around the pumpkin, as many times you want, I did it 6 times. Fix the yarn and cut of. 

Stem: 

Use brown yarn. 

Row 1:        6 sc in a magic loop.                                                  (6)
Row 2:        *2 sc in same sc, 1sc* - repeat 3 times.                      (9)
row 3-7:      1 sc in each sc.                                                         (9)

Curly vine: make 3

Use green yarn. 

Ch 50. 3 sc in 2nd loop from the hook. Continue to make 3 sc in each loop. 

Leaf: make 3

Ch 16
Row 1: 1 sc in 2nd loop from the hook, 1 ch, 2 hdc, 7 dc, 2 hdc, 1 sc, 
           3 sc in last loop. Turn and work youre way down the other side of 
           the chain. 1 sc, 2 hdc, 7 dc, 2 hdc, 2 sc.
Row 2: 1 sc in each sc round. St to the beginning and tie off. 

Sew the vines and leafs to the top of the pumpkin and fasten them with knots. 
Stuff the stem a bit, and put it over the yarnknots and sew it in place. 



ENG, Pokémon, Cubone

Cubone


Here we have the little sweet Cubone from Pokémon. 

One of all stories about him says that he has the skull of his mother on the head and he cant take it of. This little cubone can take of that mask :)



Hooksize 4 mm (G)

Head: 

Use brown yarn. 

Row 1:        5 sc in a magic loop.                                                  (5)
Row 2:        2 sc i each sc around.                                                (10)
Row 3:      *2 sc in next, 1 sc* - repeat                                         (15)
Row 4:      *2 sc in next, 2 sc* - repeat                                         (20) 
Row 5-8:     1 sc in each sc around.                                              (20)
Row 9:      (*2 sc in next* 8 times), 12 sc.                                    (28)
Row 10-14: 1 sc in each sc around.                                              (28)
Row 15:     *dc2tog, 2 sc* - repeat                                              (21)
Row 16:      1 sc in each sc around.                                              (21)
Row 17:     *dc2tog, 1 sc* - repeat                                              (14)
Row 18:     *dc2tog* - repeat                                                       (7)

Fasten off and stuff the head.

Body:

Use brown yarn. 

Row 1:        6 sc in a magic loop.                                                  (6)
Row 2:        2 sc i each sc around.                                                (12)
Row 3:      *2 sc in next, 1 sc* - repeat                                         (18)
Row 4:      *2 sc in next, 2 sc* - repeat                                         (24) 
Row 5-7:     1 sc in each sc around.                                              (24)
Row 8:      *2 sc in next, 3 sc* - repeat                                         (30)
Row 9-13:   1 sc in each sc around.                                              (30)
Row 14:     *dc2tog, 3 sc* - repeat                                              (24)
Row 15:     *dc2tog, 2 sc* - repeat                                              (18)
Row 17:     *dc2tog, 1 sc* - repeat                                              (12)
    Stuff the body.
Row 18:     *dc2tog* - repeat                                                       (6)

Fast off and sew on the head to the body. 

Feet: Make 2.

 Use brown yarn. 

Row 1:        6 sc in a magic loop.                                                  (6)
Row 2:      *2 sc in next, 2 sc* - repeat 2 times.                            (8)
Row 3:      *2 sc in next, 3 sc* - repeat 2 times.                            (10) 
Row 4-9:     1 sc in each sc around.                                              (10)
    Stuff the feet.
Row 10:    *dec2tog* - repeat                                                      

Arms: Make 2.

 Use brown yarn. 

Row 1:        6 sc in a magic loop.                                                  (6)
Row 2:      *2 sc in next, 2 sc* - repeat 2 times.                            (8)
Row 3-7:     1 sc in each sc around.                                              (8)
    Stuff the arms.

Sew on arms and legs. 

Tail:

Use brown yarn.

Row 1:        6 sc in a magic loop.                                                  (6)
Row 2:        1 sc in each sc around.                                              (6) 
Row 3:      *2 sc in next, 2 sc* - repeat 2 times.                            (8)
Row 4:        1 sc in each sc around.                                              (8)
Row 5:      *2 sc in next, 1 sc* - repeat 4 times.                           (12) 
Row 6:        1 sc in each sc around.                                             (12)
Row 7:      *2 sc in next, 2 sc* - repeat 4 times.                           (16) 
Row 8-9      1 sc in each sc around.                                             (16)
Row 10:    *2 sc in next, 3 sc* - repeat 4 times.                           (20) 
Row 11:     1 sc in each sc around.                                              (20)

Stuff the tail and sew it on the back of Cubone. Make sure he still can stand. 


Upper spike: (Large)

In brown yarn. 

Row 1:        6 sc in a magic loop.                                                  (6)
Row 2:        1 sc in each sc around.                                              (6) 
Row 3:      *2 sc in next, 2 sc* - repeat 2 times.                            (8)
Row 4:        1 sc in each sc around.                                              (8)
Row 5:      *2 sc in next, 1 sc* - repeat 4 times.                           (12) 
Row 6:        1 sc in each sc around.                                             (12)

Stuff it and sew it on the upper part of the back. 

Lower spike: (Small)

In brown yarn. 

Row 1:        5 sc in a magic loop.                                                  (5)
Row 2:        1 sc in each sc around.                                              (5) 
Row 3:      *2 sc in next, 2 sc* - 2 times, 1 sc.                              (7)
Row 4:        1 sc in each sc around.                                              (7)

Stuff it and sew it in between the upper spike and the tail. 

Belly: 

Use light brown yarn. 

Row 1:        6 sc in a magic loop.                                                  (6)
Row 2:        2 sc in next, 1 sc, (*2 sc in next* 2 times), 
                  1 sc, 2 sc in next.                                                     (10)
Row 3:        2 sc in next, 3 sc, (*2 sc in next* 2 times), 
                  3 sc, 2 sc in next.                                                     (14)
Row 4:        2 sc in next, 5 sc, (*2 sc in next* 2 times), 
                  5 sc, 2 sc in next.                                                     (18)

Fast off and sew it on Cubones belly. 

Skull:

Use white yarn. 

Row 1:        6 sc in a magic loop.                                                  (6)
Row 2:        2 sc i each sc around.                                                (12)
Row 3:      *2 sc in next, 1 sc* - repeat                                         (18)
Row 4:      *2 sc in next, 2 sc* - repeat                                         (24) 
Row 5-6:     1 sc in each sc around.                                              (24)
Row 7-8:     ch 1, turn, 20 sc.                                                      (20)

Now lets do one side of the skull. 

Left side: 
Row 9:         ch 1, turn, 3 sc, 1 sc and 1 hdc tog.                     
Row 10-12:  ch 1 turn, 4 sc. 
Row 13:       ch 1 turn, 3 sc, 2 sc in next. Fasten off. 

Right side:
Row 9:         ch 1, 1 sc in same, 2 sc, 1 sc and 1 hdc tog.                     
Row 10-12:  ch 1 turn, 4 sc. 
Row 13:       ch 1 turn, 3 sc, 2 sc in next. Fasten off.  

Middle part:
Skipp 2 sc and begin in the third stitch. 
Row 9:         ch 2, 3 sc, 1 sc and 1 hdc tog.                     
Row 10-13:  ch 1 turn, 4 sc. 
Row 14:       ch 1 turn, 2 sc in next, 2 sc, 2 sc in next. Fasten off.  

Now lets put it together to a mask. 
Row 1:       Start on the left siden with the right side facing you. 
                 Ch 1, 1 sc in same, 5 sc on the first sidepiece, ch 3, 6 sc on 
                 the middle part, ch 3, 5 sc on the last piece.  
Row 2-4:   Ch 1, turn, 22 sc.                                                   (22)
Row 5:      Ch 1, turn, 3 sc, (*dc2tog* 8 times), 3 sc.                (14)
Row 6:      Ch 1, turn, 3 sc, (*dc2tog* 4 times), 3 sc.                (10)
Row 7:      Ch 1, turn, 3 sc, (*dc2tog* 2 times), 3 sc.                 (8)

Fast off, fold in half and sew the two sides together.

Horn: Make 2. 

In white yarn. 

Row 1:        5 sc in a magic loop.                                                  (5)
Row 2:        1 sc in each sc around.                                              (5) 
Row 3:      (*2 sc in next, 1 sc* - 2 times), 1 sc.                            (7)
Row 4-5:     1 sc in each sc around.                                              (7)

Fast off and sew them to the skull. 

Eye: Make 2.

Start with blak yarn and make 3 sc roud a magic loop. Change to white yarn and continue with 1 sc, 2 hdc, 1 sc roud the same magicloop. 
Close the loop and make a sl st in to the first black sc. 

Sew them on the head so they are placed in the eyes of the skull.  

Use the black yarn and sew the nose and mouth on Cubones head.

Bone: 

Use the white yarn. 

Row 1:        6 sc in a magic loop.                                                  (6)
Row 2-3:     1 sc in each sc around. Fast off with a sl st.                 (6)

Make another one;
Row 1:        6 sc in a magic loop.                                                  (6)
Row 2-3:     1 sc in each sc around. DONT fast off.                         (6)

Sew the two halfs together over 3 stitches with the loose end från the first half. 

v 4-11:       1 sc in each of the remaining sc around.                      (6)  

Fast off and fill. close the hole with some stitches.